|
Aitona
Location: Lerida
Operator: Endesa Cogeneracion y Renovables
Configuration: 2 X 2.5 MW semi-Kaplan
Operation: 2005
T/G supplier: Iginsa, Indar
EPC: Endesa, Eptisa, Carbonell Figueras
Photograph courtesy of Endesa
Posted 20 Dec 2005 |
Arties
Location: Lerida
Operator: Endesa Generacion
Configuration: 2 X 34 MW Pelton
Operation: 1955
T/G supplier: Neyrpic, BTH
Photograph by Xavi Larrosa
Posted 25 May 2008 |
Balaguer
Location: Lerida
Operator: Endesa Generacion
Configuration: 1 X 7.4 MW Kaplan
Operation: 1960
T/G supplier: Neyrpic, Aguirena
Photograph by Xavi Larrosa
Posted 26 May 2008 |
|
Baserca
Location: Lerida
Operator: Endesa Generacion
Configuration: 1 X 6 MW Francis
Operation: 1983
T/G supplier: Neyrpic, GEE
Photograph by Xavi Larrosa
Posted 26 May 2008 |
Benos
Location: Lerida
Operator: Endesa Generacion
Configuration: 2 X 8 MW Francis
Operation: 1952
T/G supplier: Neyrpic, ACEC
Photograph by Xavi Larrosa
Posted 26 May 2008 |
Boadella Pie Presa Rebuild
Location: Girona
Operator: Endesa Generacion
Configuration: 1 X 3.6 MW Francis
Operation: 1984
T/G supplier: Sulzer, ABB
Photograph by Xavi Larrosa
Posted 28 May 2008 |
|
Bono
Location: Lerida
Operator: Endesa Generacion
Configuration: 2 X 1.88 MW Francis
Operation: 1953
T/G supplier: Vevey, Secheron
Photograph by Xavi Larrosa
Posted 28 May 2008 |
Bosost
Location: Lerida
Operator: Endesa Generacion
Configuration: 2 X 10.8 MW Francis
Operation: 1956
T/G supplier: Sulzer Escher Wyss, GEE
Photograph by Xavi Larrosa
Posted 28 May 2008 |
Caldes de Bois
Location: Lerida
Operator: Endesa Generacion
Configuration: 2 X 16 MW Francis
Operation: 1958-1959
T/G supplier: Voith, BBC
Photograph by Xavi Larrosa
Posted 26 May 2008 |
|
Camarasa Rebuild
Location: Lerida
Operator: Endesa Generacion
Configuration: 4 X 15 MW Francis
Operation: 1958-1959
T/G supplier: Sulzer Escher Wyss, GEC
Quick facts: The first electromechanical equipment at Camarasa was installed in 1929 just downstream of the 103m Camarasa Dam. The plant was
built for Barcelona Traction, Light and Power Co Ltd, known as Canadenca since it was founded in Sep 1911 by
Canadian engineer Fred Stark Pearson. Pearson acquired development rights on the Rio Noguera Pallaresa and then built the dam and power
station. This was the first Spanish dam over 100m in height. The plant was taken over by FECSA, later rolled up into Endesa.
Photograph by Xavi Larrosa
Posted 20 Jul 2008 |
Caneles
Location: Lerida
Operator: Endesa Generacion
Configuration: 3 X 36 MW Francis
Operation: 1958-1959
T/G supplier: Voith, Secheron
Quick facts: Canelles Dam is a 140m, high-arch structure located on the Rio Noguera Ribagorzana in the Spanish Pyreness. The dam was completed
in Apr 1958. After the first partial filling of the reservoir, substantial leakage was detected in complex karstic formations along the abutments.
This was remedied by a 400m grout curtain with 25,000t of grout injected.
Photograph by Xavi Larrosa
Posted 20 Jul 2008 |
Capdella-II
Location: Lerida
Operator: Endesa Generacion
Configuration: 5 X 6.35 MW Pelton
Operation: 1989
T/G supplier: Sulzer Escher Wyss, Soc Alsacienne de Construction Mecanique
Quick facts: The original plant was built from 1911-1914 by EE Cataluņa and was connected to Barcelona by a 150km, 80kV line.
Photograph by Xavi Larrosa
Posted 20 Jul 2008 |
